Products
G2000
An ultra-high-performance concrete with high flowability designed for use on- and off-shore.
Y-MatTec G2000® has been designed to meet the highest standards and requirements in the industry. Y-MatTec G2000® is approved by Siemens Gamesa and Vestas Wind Systems.
G2000 at a glance
Compatible with all wind turbines
Designed for use with all on- and offshore wind turbines
Rapid strength
Allows a fast workflow in construction process
Best in class quality
DNV certified to meet the highest of standards
Secure operation
High in-service wind power production for entire lifespan
High fatigue resistance
Maximum strength capable to absorb energy loads with minimum maintenance
Delivered in big bags
Select your big bag size between 250 and 1,500 kg
Mixing instructions
Y-MatTec G2000® is a special grout material. Application must be carried out by trained and qualified personnel only.
Y-MatTec G2000® is to be mixed 8.0% to 8.3 % potable water at 20 degrees Celsius (based powder mass) in an adequate mixer, normally a paddle mixer.
The amount of mixing water is depending on ambient temperature – higher temperature increases the water demand. The product can be mixed and used within ambient temperature from 2 degrees Celsius ((7.2 – 7.5 % mixing water) to 30 degrees Celsius (8.3 – 8.5 % mixing water). Powder is added into the mixer followed by mixing water and mixed for approximately 6 minutes depending on the effectiveness of the mixer.
The surface to be grouted must be clean, free from dirt, oil grease or other contaminations. Concrete surfaces to be grouted has as well to be water saturated and with no free-standing water just prior to grouting. After grouting of an onshore foundation, the grouted surface must be protected for drying either by use of plastic cover or approved curing compound.
Interested in
Our Services?
Send us a message here, send us an e-mail to info@ymattec.com or give us a call on +45 8230 3551 or +44 738 798 9916