Products
G900
A unique on- and offshore grouting material developed by Y-MatTec and in the process of DNV-certification.
G900 at a glance
Unique offshore design
Developed in concert with market leading grouting contractors
Designed for large-scale
Designed for use with industry’s highest output mixers
Best in class quality
Produced according to the same standards as our DNV type approved products
Flow properties
Ideal for long duration workability and long-distance pumping
High fatigue resistance
Stress strain data fit for the demand of modern offshore foundations
Bulk supply
Supplied as bulk in the amount you need
Mixing instructions
Y-MatTec G900® is a special grout material. Application must be carried out by trained and qualified personnel only.
Application thickness from 10 mm to 600 mm.
Y- MatTec G900® is to be mixed with 14% to 15% potable water at 20°C (based powder mass) in a jet mixer (continuous mixer) or a mechanical batch mixer. The water dosage depends on ambient temperature – higher temperature increases the water demand. The product can be mixed and used within ambient temperature from 2°C to 30°. At any temperature, it is recommended to make a flow test before the application, to verify the correct water dosage.
The surface to be grouted must be clean, free from dirt, oil grease or other contamination. Concrete surfaces to be grouted have as well to be water saturated and with no free-standing water just prior to grouting.
Interested in
Our Services?
Send us a message here, send us an e-mail to info@ymattec.com or give us a call on +45 8230 3551 or +44 738 798 9916